Glossary
A-GPS (Assisted GPS)
Assisted GPS (A-GPS) is used to speed up start-up times of GPS-based positioning systems. GPS may have problems getting a lock when the signal is weak and in such a case A-GPS would assist in getting a lock.
This, however, is achieved by the use of an Assistance Server, so a data connection is required and charges may apply for the data transfer.
A2DP (Advanced Audio Distribution Profile)
A2DP is used for streaming stereo music wirelessly to headphones or speakers over Bluetooth.
Unlike other Bluetooth profiles (Headset and Handsfree), A2DP is one-way only and streams a stereo signal.
AAC (Advanced Audio Coding)
AAC is a file format for storing digital audio. It's commonly used for storing music on the Internet, PCs and portable music players and phones.
It is similar to MP3, but it was designed to be its successor and offers better quality and smaller file sizes. It also supports DRM, which enforces copyright.
AAC+ and AAC++ are newer versions of the standard.
Accelerometer
The accelerometer is a built-in electronic component that measures tilt and motion. It is also capable of detecting rotation and motion gestures such as swinging or shaking.
The most common use for it is to activate auto screen rotation on mobile devices when the user changes their orientation from portrait to landscape or vice-versa.
Another modern application for the accelerometer is to control the mobile device music player with gestures (Sony Ericsson Shake control or Samsung Motion play technologies).
Accelerometers are also utilized for enriching the gaming controls (navigating by tilting the device instead of by pressing keys).
Another popular mobile phone feature based on an accelerometer is turn-to-mute. It allows user to mute an incoming call, silence an alarm or pause the mobile music player simply by turning the device face down.
Flight mode
Known also as Airplane mode, this mode disables all radio parts of a mobile phone but leaves other functions available. These include music player, organizer and everything that doesn't require the radio transmitters.
This mode is required because most airlines forbid the use of wireless devices during flight. Some airlines do not allow the use of such devices even in Airplane mode.
There is an industry standard icon to signify that airplane mode is on but not all phones use it.
This mode is required for several reasons. Preventing interference with the airplane equipment is the best known one but another reason is that cell towers cannot handle phones moving at high altitudes and speeds.
Alarm Clock
This is a feature allowing a mobile phone to act like a common alarm clock but with more flexibility.
Currently, all mobile phones offer this functionality with varying feature sets. For example, most devices allow you to set an unlimited number of alarms and set them to repeat on a daily or weekly basis. Some even allow a customizable snooze period and with the most advanced devices you can silence an alarm just by turning the device face down.
Using a favorite FM radio station as an alarm tone is also an option with some handsets.
Some phones require the device to be on for the alarm to work while others do not.
Alphanumeric
A string of characters containing both letters (A-Z) and numbers (0-9).
An alphanumeric text entry field will accept both letters and numbers. An alphanumeric keypad is one with both letters and numbers on the keys.
AMOLED display (Active-matrix organic light-emitting diode)
AMOLED is an emerging display technology used in portable devices like mobile phones. Active-matrix OLED displays provide the same performance as their passive-matrix OLED counterparts, but they consume significantly less power.
This advantage makes active-matrix OLEDs well suited for portable electronics where battery power consumption is critical.
Analog
A method of transmitting information using energy waves. It doesn't have discrete levels but is a continuously variable wave. Human voice for example is transferred by directly converting the sound wave to electricity.
Analog cell phones (known also as 1G) used this technology. However virtually all modern cell phones use digital signals (2G or later).
Android
Android is a Linux-based smartphone operating system and software platform created by Google.
The Android platform is supported by the Open Handset Alliance and is open source. Any manufacturer can use Android on their phones and software written for the platform will run on Android-based devices regardless of manufacturer.
Android competes with Windows Mobile, S60, and other smartphone platforms.
Antenna
The physical device used for sending/receiving radio waves. Older phones used external antennas while most current phones use an internal antenna. The size and shape of the antenna is designed according to the type of radio waves being used.
APN (Access Point Name)
APN is the name (web address) of an access point for GPRS/EDGE/UMTS data connection. Usually wireless carriers provide the APN to their end users.
Audio jack
A common connector for plugging in a standard pair of music headphones such as the ones found on music players, computers and most other electronic devices with audio outputs.
It can support stereo and/or microphone, depending on the number of separate connector rings on the jack.
Some phones offer only a 2.5 mm jack, which is a smaller variety of the same principle.
Headphones supplied with mobile phones usually have a mic somewhere along the cable and a remote button that allows for managing calls without using the phone.
Some manufacturers opt for placing a 3.5mm audio jack on this remote control instead of directly on the phone itself. The reason for this is that 3.5mm jacks take up quite a lot of internal space; plus, in this way the user gets to keep the remote control/mic functionality while using third-party headphones.
Auto-focus
Auto-focus is a feature of digital cameras that allows them to focus correctly on a subject. It enhances the quality of the photo over fixed-focus cameras and allows for close-ups (or the even closer macro shots).
Phones use passive auto-focus with contrast measurement. This means that the camera needs contrast to focus and have problems focusing on a blank wall or in low light conditions.
Some phones can use their camera LEDs as a focus assist light to help deal with the latter case.
AVRCP (Audio/Video Remote Control Profile)
AVRC is a Bluetooth profile that allows remote control of media playback on other devices. Supported functions are play, pause, stop, next, and previous.
It is usually coupled with A2DP so that, for example, wireless headphones use A2DP to stream the music and AVRC to control playback.
Band
A specific range of frequencies (for example those between 1850 MHz and 1995 MHz) are called a band.
Bar
The bar form factor is the most common and simple form factor for a mobile phone. The body of a bar phone is one, single block and has no moving parts (aside from the buttons). "Locking" the keyboard is done to prevent accidental key presses when the phone is carried in a pocket, purse, etc.
Base Station
A fixed station that uses radio waves to communicate with mobile devices. It serves as the link between the user's device and the carrier's network.
Base stations range in size and area of coverage. Some may cover a radius of several kilometers while others cover only a few city blocks. Most stations transmit in all directions but there are also directional antennas aimed at a specific direction.
Usually base stations are owned by a single carrier but may offer roaming coverage for other networks.
Bluetooth
Bluetooth is a wireless protocol for exchanging data over short distances from fixed and mobile devices, creating personal area networks.
There are two important parameters of Bluetooth devices - class and supported profiles.
"Class" signifies the distance at which a Bluetooth connection is possible. Most mobile devices are Class 2, which means they have a range of up to 10 m. Class 1 devices are rare and have a range of up to 100 feet.
A "profile" is a type of Bluetooth connection. The most common are the Headset (HSP) and Handsfree (HFP) profiles that enable the device to connect to a wireless headset or handsfree.
Some other profiles are OBEX (OBject EXchange) which allows transfer of files, contacts and events; A2DP, which adds support for streaming of stereo sound and AVRC, which allows remote control of playback.
Broadband
In data communications, a "broadband connection" is a connection with a high speed of data transfer (greater than 56 kbps). Generally, it is fast enough to support streaming video.
Capacitive Touchscreen
Capacitive touch sensors are used either as buttons or on touchscreens. They work by sensing the electrical properties of the human body instead of pressure and generally they don't work with a stylus so they don't allow handwriting recognition. However, capacitive touchscreens feel more sensitive than their resistive counterparts.
Capacitive touch screens are also considered more durable than resistive touch screens.
Data-capable
A data-capable phone can serve as a modem to connect a computer to the Internet or another system. Some phones allow faxes to be sent and received (if there is network support for that).
Digital Zoom
Zoom is a feature common among cameras and is used to make the subject appear closer. Cameras on mobile phones often have a zoom feature as well but most often it is digital zoom.
Digital zoom is implemented in one of two ways:
- Cropping - the software crops the image so that the subject would appear bigger on the screen of the phone but the resulting image is smaller than the maximum resolution of the camera. The photo of the subject does not have any more detail than a non-cropped photo would.
- Stretching - this is similar to cropping but instead it stretches the cropped photo to the selected resolution. Since the stretching is done by an algorithm that uses just the information from the cropped photo no additional detail is visible.
Display type
There are lot of display types used in mobile phones. They can be either color or monochrome. Monochrome displays on the other hand can be alphanumeric or graphic. Alphanumeric displays can show only symbols with a constant size, while graphic displays can show fonts of different sizes and animations.
The color displays usually are CSTN, TFT, TFD or OLED with a predominant use of TFT displays in current mobile lineups. There are also two types of touchscreen displays - capacitive and resistive, which are both based on TFT technology.
CAPACITIVE touchscreens work by sensing the electrical properties of the human body, while RESISTIVE ones operate by sensing direct pressure applied by the user.
The RESISTIVE type can be activated by pressing not only with human skin but also with a stylus and thus allow handwriting recognition input.
Dual-band
Mobile phone networks work using signals on specific frequency bands and a phone must support those bands in order to work with the network. Dual-band refers to the phones ability to work with two different bands. It is important to specify which bands exactly.
Networks in different geographical locations work on different bands - GSM networks in the Americas use the 850 MHz and 1900 MHz bands while networks in Europe, Brazil, Asia and Africa use the 900/1800 MHz bands.
For example an 900/1800 dual-band phone won't work in the US and an 850/1900 phone won't work in Europe. A 900/1900 phone should work on at least one network in most countries around the world.
Dual-Mode
A dual-mode phone is a phone capable of sending/receiving data in two different ways. For example, a dual-mode phone could support both GSM and CDMA.
EDGE (Enhanced Data for Global Evolution)
EDGE (also known as Enhanced GPRS or EGPRS) is a data system used on top of GSM networks. It provides nearly three times faster speeds than the outdated GPRS system. The theoretical maximum speed is 473 kbps for 8 timeslots but it is typically limited to 135 kbps in order to conserve spectrum resources. Both phone and network must support EDGE, otherwise the phone will revert automatically to GPRS.
EDGE meets the requirements for a 3G network but is usually classified as 2.75G.
Email client
Some phones provide a full email client that can connect to a public or private email server via a wireless data connection(cellular or Wi-Fi).
There are different protocols used by the servers and some may not be supported by the phone's email client.
Flash Memory
Flash memory is non-volatile computer memory that can be electrically erased and reprogrammed. Non-volatile means that no power is needed to maintain the information stored on the chip.
It is a technology that is primarily used in memory cards and USB flash drives as solid state storage and its main purpose is an inexpensive way of storing or transferring data between computers and other digital products. It’s used as primary storage memory on various portable devices due to its low cost, compact size, great physical endurance and low power consumption.
The most popular types of flash memory are NAND and NOR.
GB (Gigabyte)
1GB is equal to approximately 1 billion bytes or exactly 1024 MB.
GPRS
General Packet Radio Service is a packet-switching technology that enables data transfers through cellular networks. It is used for mobile internet, MMS and other data communications. In theory the speed limit of GPRS is 115 kbps, but in most networks it is around 35 kbps. Informally, GPRS is also called 2.5G.
GPS (Global Positioning System)
Global Positioning System was developed by the United States' Department of Defense. It uses between 24 and 32 Medium Earth Orbit satellites that transmit precise microwave signals. This enables GPS receivers to determine their current location, time and velocity. The GPS satellites are maintained by the United States Air Force.
GPS is often used by civilians as a navigation system. On the ground, any GPS receiver contains a computer that "triangulates" its own position by getting bearings from at least three satellites. The result is provided in the form of a geographic position - longitude and latitude - to, for most receivers, within an accuracy of 10 to 100 meters. Software applications can then use those coordinates to provide driving or walking instructions.
Getting a lock on by the GPS receivers on the ground usually takes some time especially where the receiver is in a moving vehicle or in dense urban areas. The initial time needed for a GPS lock is usually dependent on how the GPS receiver starts. There are three types of start - hot, warm and cold.
The hot start is when the GPS device remembers its last calculated position and the satellites in view, the almanac used (information about all the satellites in the constellation), the UTC Time and makes an attempt to lock onto the same satellites and calculate a new position based upon the previous information. This is the quickest GPS lock but it only works if you are generally in the same location as you were when the GPS was last turned off.
The warm start is when the GPS device remembers its last calculated position, almanac used, and UTC Time, but not which satellites were in view. It then performs a reset and attempts to obtain the satellite signals and calculates a new position.
The receiver has a general idea of which satellites to look for because it knows its last position and the almanac data helps identify which satellites are visible in the sky. This takes longer than a hot start but not as long as a cold start.
And finally – the cold start is when the GPS device dumps all the information, attempts to locate satellites and then calculates a GPS lock. This takes the longest because there is no known information.
The GPS receiver has to attempt to lock onto a satellite signal from any available satellites, basically like polling, which takes a lot longer than knowing which satellites to look for. This GPS lock takes the longest.
In an attempt to improve lock times, cellphone manufacturers and operators have introduced the Assisted GPS technology, which downloads the current ephemeris for a few days ahead via the wireless networks and helps triangulate the general user’s position with the cell towers thus allowing the GPS receiver to get a faster lock at the expense of several (kilo)bytes.
Half-QWERTY keyboard layout
A keyboard layout similar to QWERTY but having two letters per key. The basic arrangement is the same, however the keyboard is narrower which makes it suitable for use with one hand and it fits more easily in the lower part of a bar-shaped device.
Predictive text is almost always used auto-suggest words allowing users to press a button only once.
Handwriting recognition
The ability of a device or software program to analyze the shape of cursive or printed handwriting drawn on a touchscreen and then translate it into letters, words, numbers, and punctuation marks.
Most devices that have touchscreens have built-in handwriting recognition capability. Input is best done using a stylus.
It should be noted that only devices using resistive type of touchscreen readily allows for input with various objects. The capacitive touchscreen devices can accept only human finger input.
HSCSD (High-Speed Circuit Switched Data)
A system for data calls on GSM networks that came before packet based systems such as GPRS and EDGE.
HSCSD is the "high-speed" variant of CSD (maximum speed of 9.6 kbps) that has better error-correction codes that give a boost in speed of about 50% and allows several call channels to be used as one - up to four channels - resulting in a maximum speed of 57.6 kbps.
HSCSD was never widely adopted outside Europe.
HSDPA (High-Speed Downlink Packet Access)
An upgrade for UMTS networks that doubles network capacity and increases download data speeds by five times or more.
The service was initially deployed at 1.8 Mbps but upgrades to the networks and new user devices led to increased rates of 3.6 Mbps, followed by 7.2 Mbps.
HSDPA only handles the downlink while the uplink is handled by a related technology called HSUPA. The combination of both technologies is usually called HSPA.
HSUPA (High-Speed Uplink Packet Access)
An upgrade for UMTS/HSDPA networks that increases upload data speeds up to 5.76 Mbps. HSUPA together with HSDPA are sometimes referred to as HSPA.
The standard is backwards compatible with UMTS and HSDPA and will work with devices supporting only those standards.
HSUPA only handles the uplink while the downlink is handled by a related technology called HSDPA.
IMEI (Internet Mobile Equipment Identity)
A unique 15-digit serial number that uniquely identifies a GSM or UMTS mobile phone. It consists of four parts and provides information, such as the manufacturer, to the mobile network. It is usually printed on the device under the battery.
IMEI can be used to "ban" a stolen phone, making it hard to use by the thief even with a different SIM card.
Li-Ion (Lithium Ion)
This stands for a type of rechargeable battery. They are much lighter than earlier battery types (NiCd and NiMH), have a long life cycle and generally don't suffer from the so-called "memory effect".





